Rescue Nitrogen Applications to Corn
Crop Focus from Pioneer Agronomy Sciences
Crop Focus from Pioneer Agronomy Sciences
1. When was N applied?
2. What fertilizer was used?
3. Quantity of N applied?
4. Field conditions after application?
Table 1. Amount of nitrogen fertilizer in the nitrate-N form 0, 3 and 6 weeks after application.
Table 2. Estimated denitrification losses as influenced by soil temperature and days of saturation.
— To reduce leaf burn, weight the hoses to help keep them on the ground.
— Banding will also help minimize urea hydrolysis and volatilization.
— Broadcasting ammonium nitrate (NH4NO3) and UAN solution can cause extensive leaf burning and possible yield loss.
— Urea is much safer to broadcast, usually resulting in only minimal crop injury (Figure 3).
— Urea is subject to NH3 volatilization in the presence of urease, a naturally occurring soil and plant enzyme.
— The use of a urease inhibitor (e.g., Agrotain® N stabilizer), can help delay urea hydrolysis and reduce NH3 volatilization.
— Banded applications also will help minimize N loss.
— Due in part to a reduction in the number of kernel rows per ear, which is generally determined between V5 and V8.
— Due in part to a reduction in the number of kernel rows per ear, which is generally determined between V5 and V8.
— In an Indiana study, 70 lbs N/acre applied at V13 resulted in an economic yield response (Emmert, 2009).
— Grain yield of corn receiving N at V15 was not significantly different than the yield of corn receiving 200 lb N/acre at planting in northwest Indiana in 2010 (Nielsen et al., 2011).
— Missouri studies have shown that yield can be recovered with N applications as late as tasseling.
— Corn takes up about 37% of its total N requirement during the grain-fill period (R1 to R6). In high yield environments, post-flowering N uptake can range from 85 to 130 lbs N/acre.
— N for grain development originates from both remobilized N from vegetative tissues and continued N uptake from the soil.
— Approximately 62% of grain N content is supplied by continued N uptake after flowering.
— Use of a urease inhibitor can help prevent urea hydrolysis and subsequent NH3 volatilization.
— To avoid severe corn tissue damage, do not use UAN solution, ammonium nitrate or ammonium sulfate.
— Could include finding a service provider for high-clearance or aerial applications well ahead of the potential need.
— However, because corn takes up and uses N throughout the reproductive period, consider remediating deficiencies with moderate (40 to 80 lbs/acre) amounts of N as late as 4 weeks post-pollination.
The foregoing is provided for informational use only. Contact your Pioneer sales professional for information and suggestions specific to your operation. Product performance is variable and subject to any number of environmental, disease, and pest pressures. Individual results may vary.
All products are trademarks of their manufacturers.